Search results: Found 7

Listing 1 - 7 of 7
Sort by
The Practice of Industrial Policy: Government—Business Coordination in Africa and East Asia

Authors: ---
ISBN: 9780198796954 Year: Pages: 336 DOI: 10.1093/acprof:oso/9780198796954.001.0001 Language: English
Publisher: Oxford University Press Grant: WIDER Studies in Development Economics
Subject: Economics
Added to DOAB on : 2017-04-27 11:01:30
License:

Loading...
Export citation

Choose an application

Abstract

Much of the information relevant to policy formulation for industrial development is held by the private sector, not by public officials. There is, therefore, fairly broad agreement in the development literature that some form of structured engagement—often referred to as close or strategic coordination—between the public and private sectors is needed, to assist in the design of appropriate policies and provide feedback on their implementation. There is less agreement on how that engagement should be structured, how its objectives be defined, and how success be measured. In fact, the academic literature provides little practical guidance on how governments interested in developing such a framework should go about doing it. The burden of this lack of guidance falls most heavily on Africa, where—despite twenty years of growth—lack of structural transformation has slowed job creation and the pace of poverty reduction. In 2014, the Korea International Cooperation Agency (KOICA) and United Nations University World Institute for Development Economics Research (UNU-WIDER) launched a joint research project: The Practice of Industrial Policy. The aim is to help African policy makers develop better coordination between public and private sectors in order to identify the constraints to faster structural transformation and design, implement, and monitor policies to remove them. This book, written by national researchers and international experts, presents the results of that research by combining a set of analytical ‘framing’ essays on close coordination with case studies of successful and unsuccessful efforts at close coordination in Africa and in comparator countries.

Mining for Change

Authors: ---
ISBN: 9780198851172 Year: Pages: 512 DOI: 10.1093/oso/9780198851172.001.0001 Language: English
Publisher: Oxford University Press Grant: UNU WIDER
Subject: Economics --- Electrical and Nuclear Engineering --- Environmental Sciences
Added to DOAB on : 2020-06-25 23:58:38
License:

Loading...
Export citation

Choose an application

Abstract

For a growing number of countries in Africa the discovery and exploitation of natural resources is a great opportunity, but one accompanied by considerable risks. In Africa, countries dependent on oil, gas, and mining have tended to have weaker long-run growth, higher rates of poverty, and greater income inequality than less resource-abundant economies. In resource-producing economies, relative prices make it more difficult to diversify into activities outside of the resource sector, limiting structural change. Economic structure matters for at least two reasons. First, countries whose exports are highly concentrated are vulnerable to declining prices and volatility. Second, economic diversification matters for long-term growth. This book presents research undertaken to understand how better management of the revenues and opportunities associated with natural resources can accelerate diversification and structural change in Africa. It begins with chapters on managing the boom, the construction sector, and linking industry to the resource—three major issues that frame the question of how to use natural resources for structural change. It then reports the main research results for five countries—Ghana, Mozambique, Uganda, Tanzania, and Zambia. Each country study covers the same three themes—managing the boom, the construction sector, and linking industry to the resource. One message that clearly emerges is that good policy can make a difference. A concluding chapter sets out some ideas for policy change in each of the areas that guided the research, and then goes on to propose some ideas for widening the options for structural change.

Indian Islamic Architecture

Authors: ---
ISBN: 9789004163393 Year: Language: English
Publisher: Brill Grant: Knowledge Unlatched - 101510
Added to DOAB on : 2018-07-31 11:01:04
License:

Loading...
Export citation

Choose an application

Abstract

The British scholar John Burton-Page contributed numerous formative articles on Indian Islamic architecture for the Encyclopaedia of Islam over a period of 25 years. Assembled here for the first time, these offer an insightful overview of the subject, ranging from the earliest mosques and tombs erected by the Delhi sultans in the 13th, 14th and 15th centuries, to the great monuments of the Mughal emperors dating from the 16th and 17th centuries. The articles cover the principal forms of Indian Islamic architecture -- mosques, tombs, minarets, forts, gateways and water structures -- as well as the most important sites and their monuments. Unsurpassed for their compression of information, these succinct articles serve as the best possible introduction to the subject, indispensible for both students and travellers. The articles are supplemented by a portfolio of photographs especially selected for the volume, as well as a glossary and up to date bibliography.

Keywords

Arts --- Arts --- architecture --- india --- islam --- Indian Islamic

Industries without Smokestacks

Authors: --- ---
Book Series: WIDER Studies in Development Economics ISBN: 9780198821885 Year: Pages: 480 DOI: 10.1093/oso/9780198821885.001.0001 Language: English
Publisher: Oxford University Press Grant: UNU WIDER
Subject: Manufactures --- Economics
Added to DOAB on : 2019-05-14 11:21:02
License:

Loading...
Export citation

Choose an application

Abstract

Structural transformation in Africa has become a hot topic. One of the earliest stylized facts of development economics is that low-income countries have large differences in output per worker across sectors, and movement of workers from low- to high-productivity sectors—structural transformation is a key driver of economic growth. Between 1950 and 2006, about half of the catch-up by developing countries—led by East Asia—to advanced economy productivity levels was due to rising productivity within manufacturing combined with structural transformation out of agriculture. Manufacturing has the capacity to employ large numbers of unskilled workers, is capable of large productivity gains through innovation, and entails tradeable products that permit economies of scale and specialization. But manufacturing in Africa, rather than leading growth, has typically been a lagging sector. In 2014, the average share of manufacturing in GDP in sub-Saharan Africa hovered around 10 per cent, unchanged from the 1970s, leading some observers to be pessimistic about Africa’s potential to catch the wave of sustained rapid growth and rising incomes. This book challenges that view. It argues that other activities sharing the characteristics of manufacturing—including tourism, ICT, and other services as well as food processing and horticulture—are beginning to play a role analogous to the role that manufacturing played in East Asia. This reflects not only changes in the global organization of industries since the early era of rapid East Asian growth, but also advantages unique to Africa. These ‘industries without smokestacks’ offer new opportunities for Africa to grow in coming decades.

Workers, Managers, Productivity

Authors: --- ---
ISBN: 9789811503641 Year: Pages: 327 DOI: 10.1007/978-981-15-0364-1 Language: English
Publisher: Springer Nature
Subject: Economics --- Science (General)
Added to DOAB on : 2020-06-16 23:58:34
License:

Loading...
Export citation

Choose an application

Abstract

This open access book provides a glimpse into the Japanese management technique known as “Kaizen,” and the ways it has been disseminated around the developing world. The novelty of this book is three-fold: it provides a contextualized view of the mechanisms of initiatives implementing Kaizen in developing countries; compared with productivity studies, it places the relationship between workers and managers at the center of inquiry, reflecting the intent of SDG8 concerning decent work and economic growth; and it provides an overview of the heterogeneity of Kaizen in terms of geography and firm size. This book explores how improving management techniques can support firms’ productivity and quality. Given its wide range of case studies from across Africa, Asia and Latin America, this book will be of value to scholars, policymakers and advocates of sustainable development alike.

Manufacturing Transformation: Comparative Studies of Industrial Development in Africa and Emerging Asia

Authors: --- --- --- --- et al.
Book Series: WIDER Studies in Development Economics ISBN: 9780198776987 Year: Pages: 336 DOI: 10.1093/acprof:oso/9780198776987.001.0001 Language: English
Publisher: Oxford University Press Grant: UNU WIDER
Subject: Economics
Added to DOAB on : 2016-08-05 11:01:21
License:

Loading...
Export citation

Choose an application

Abstract

While it is possible for economies to grow based on abundant land or natural resources, more often structural change—the shift of resources from low-productivity to high-productivity sectors—is the key driver of economic growth. Structural transformation is vital for Africa. The region’s much-lauded growth turnaround since 1995 has been the result of fewer economic policy mistakes, robust commodity prices, and new discoveries of natural resources. At the same time, Africa’s economic structure has changed very little. Primary commodities and natural resources still account for the bulk of exports. Industry is most often the leading driver of structural transformation. Africa’s experience with industrialization over the past thirty years has been disappointing. In 2010, sub-Saharan Africa’s average share of manufacturing value added in GDP was 10 per cent, unchanged from the 1970s. In fact the share of medium- and high-tech goods in manufacturing production has been falling since the mid-1990s. Per capita manufactured exports are less than 10 per cent of the developing country average. Consequently, Africa’s industrial transformation has yet to take place. This book presents results of comparative country-based research that sought to answer a seemingly simple but puzzling question: why is there so little industry in Africa? It brings together detailed country case studies of industrial policies and industrialization outcomes in eleven countries, conducted by teams of national researchers in partnership with experts on industrial development. It provides the most comprehensive description and analysis available of the contemporary industrialization experience in low-income Africa.

Made in Africa

Authors: --- --- --- --- et al.
ISBN: 9780815728153 9780815728177 9780815728160 Year: Language: English
Publisher: Brookings Institution Press Grant: Knowledge Unlatched - 102764
Subject: Economics
Added to DOAB on : 2019-03-08 11:21:04
License:

Loading...
Export citation

Choose an application

Abstract

Why is there so little industry in Africa? Over the past forty years, industry and business interests have moved increasingly from the developed to the developing world, yet Africa’s share of global manufacturing has fallen from about 3 percent in 1970 to less than 2 percent in 2014. Industry is important to low-income countries. It is good for economic growth, job creation, and poverty reduction. Made in Africa: Learning to Compete in Industry outlines a new strategy to help Africa gets its fair share of the global market. Here, case studies and econometric and qualitative research from Africa, as well as emerging Asia, help the reader understand what drives firm-level competitiveness in low-income countries.

Listing 1 - 7 of 7
Sort by
Narrow your search

Publisher

Oxford University Press (4)

Brill (1)

Brookings Institution Press (1)

Springer Nature (1)


License

CC by-nc-sa (4)

CC by (1)

CC by-nc (1)

CC by-nc-nd (1)


Language

english (7)


Year
From To Submit

2020 (2)

2019 (1)

2017 (1)

2016 (2)

2007 (1)