Search results: Found 8

Listing 1 - 8 of 8
Sort by
Grundlegende Aspekte des 2K-Metallpulverspritzgießens

Author:
Book Series: Schriftenreihe des Instituts für Angewandte Materialien, Karlsruher Institut für Technologie ISSN: 21929963 ISBN: 9783731502173 Year: Volume: 36 Pages: III, 138 p. DOI: 10.5445/KSP/1000040997 Language: GERMAN
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:01:58
License:

Loading...
Export citation

Choose an application

Abstract

An important requirement for the combination of two materials in order to get a low stress and low warpage, crack-free composite component is a timely synchronized sintering behavior of both components. The aim of this work was to analyze the effect of the particle size distribution on the sintering behavior and the resulting consequences of the particle size change for the flow properties during injection molding.

Entwicklung und Herstellung naturähnlich verzweigter Kühlkörper für LED-Systeme

Author:
Book Series: Spektrum der Lichttechnik / Karlsruher Institut für Technologie (KIT), Lichttechnisches Institut ISSN: 21951152 ISBN: 9783731506355 Year: Volume: 14 Pages: IV, 228 p. DOI: 10.5445/KSP/1000066146 Language: GERMAN
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:01:59
License:

Loading...
Export citation

Choose an application

Abstract

In terms of general lighting applications, this work deals with the use of natural models for the heat dissipation of LEDs, their implementation into a complete LED system and ultimately its manufacturing. The result is a lighting system that represents a high technical performance in conjunction with a high aesthetic value that can be an example for the development of different LED systems.

Großformatige Abformung mikrostrukturierter Formeinsätze durch Heißprägen

Author:
ISBN: 9783866441859 Year: Pages: VII, 127 p. DOI: 10.5445/KSP/1000007182 Language: GERMAN
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:02:00
License:

Loading...
Export citation

Choose an application

Abstract

Im Rahmen dieser Arbeit wird das Heißprägeverfahren für große Formate und Strukturen mit hohen Aspektverhältnissen weiter entwickelt.Weiterhin werden Möglichkeiten zur Herstellung großformatiger Formeinsätze und zur Abformung durchgehender

Discontinuous Fiber Composites

Author:
ISBN: 9783038974918 / 9783038974925 Year: Pages: 210 DOI: 10.3390/books978-3-03897-492-5 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Chemistry (General) --- General and Civil Engineering --- Materials
Added to DOAB on : 2019-01-15 12:25:03
License:

Loading...
Export citation

Choose an application

Abstract

Discontinuous fiber-reinforced polymers have gained importance in the transportation industries due to their outstanding material properties, lower manufacturing costs and superior lightweight characteristics. One of the most attractive attributes of discontinuous fiber reinforced composites is the ease with which they can be manufactured in large numbers, using injection and compression molding processes.Typical processes involving discontinuous fiber reinforced thermoplastic composite materials include injection and compression molding processes as well as extrusion. Furthermore, the automotive and appliance industries also use thermosets reinforced with chopped fibers in the form of sheet molding compound and bulk molding compound, for compression and injection-compression molding processes, respectively.A big disadvantage of discontinuous fiber composites is that the configuration of the reinforcing fibers is significantly changed throughout production process, reflected in the form of fiber attrition, excessive fiber orientation, fiber jamming and fiber matrix separation. This process-induced variation of the microstructural fiber properties within the molded part introduces heterogeneity and anisotropies to the mechanical properties, which can limit the potential of discontinuous fiber reinforced composites for lightweight applications.The main aim of this Special Issue is to collect various investigations focused on the processing of discontinuous fiber reinforced composites and the effect processing has on fiber orientation, fiber length and fiber density distributions throughout the final part. Papers presenting investigations on the effect fiber configurations have on the mechanical properties of the final composite products and materials are welcome in the Special Issue. Researchers who are modeling and simulating processes involving discontinuous fiber composites as well as those performing experimental studies involving these composites are welcomed to submit papers. Authors are encouraged to present new models, constitutive laws and measuring and monitoring techniques to provide a complete framework on these groundbreaking materials and facilitate their use in different engineering applications.

Processing-Structure-Properties Relationships in Polymers

Author:
ISBN: 9783039218806 / 9783039218813 Year: Pages: 400 DOI: 10.3390/books978-3-03921-881-3 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-01-07 09:08:26
License:

Loading...
Export citation

Choose an application

Abstract

This collection of research and review papers is aimed at depicting the state of the art on the possible correlations between processing variables, obtained structure and special properties which this structure induces on the plastic part. The extraordinary capacity of plastics to modify their properties according to a particular structure is evidenced for several transformation processes and for many applications. The final common goal is to take profit of this peculiar capacity of plastics by inducing, through a suitable processing, a specific spatial organization.

Keywords

carbon nanotube --- homogeneous dispersion --- ethylene vinyl acetate --- mechanical performance --- electrical conductivity --- microencapsulation --- melamine polyphosphate --- polyurethane --- composite --- flame retardant --- biodegradable nanofibers --- PLGA --- collagen --- epinephrine --- lidocaine --- polyimide film --- linear coefficient of thermal expansion (CTE) --- copper clad laminate --- structure and properties --- polymorphism --- isotactic polypropylene --- deformation --- phase transitions --- uniaxial compression --- uniaxial tensile deformation --- temperature --- in situ X-ray --- cavitation --- indentation --- Harmonix AFM --- polymer morphology --- mechanical properties --- ultra-high molecular weight polyethylene (UHMWPE) --- microcellular injection molding --- supercritical fluid --- supercritical N2 --- supercritical CO2 --- tissue engineering and regenerative medicine --- bioresorbable polymers --- 3D printing/additive manufacturing --- fused filament fabrication/fused deposition modelling --- degradation --- physicochemical characterization --- polycaprolactone --- layered double hydroxides --- ionic liquids --- PLA --- reactive blending --- biobased films --- graphene --- nanoreinforcement --- curing rate --- epoxy microstructure --- fatigue --- composites --- critical gel --- poly(lactic acid) --- carbon black --- graphite --- polymer blend --- poly(ethylene terephthalate) --- intrinsic viscosity --- polyolefin --- compatibilizer --- isotactic polypropylene --- stress-induced phase transitions --- structural analysis --- X-ray diffraction --- polyoxymethylene (POM) --- octakis[(3-glycidoxypropyl)dimethylsiloxy]octasilsesquioxane (GPOSS) --- composites --- morphology --- mechanical properties --- conductive filler --- orientation --- conductive polymer composites --- foam --- model --- PLLA --- bioresorbable vascular scaffolds --- stretch blow molding --- biaxial elongation --- SAXS --- WAXS --- microfibrillar composites --- crystalline morphology --- crystallinity --- mechanical properties --- crystallisation --- morphology --- nanoparticles --- shear --- flow --- orientation --- poly(?-caprolactone) --- polyvinyl butyral --- hydrophobicity --- contact angle --- polypropylene --- atomic force microscopy --- injection molding --- mold temperature evolution --- polycaprolactone --- ultra-high molecular weight polyethylene --- incremental forming --- SPIF --- XRD --- chain orientation --- temperature sensitive --- gel --- controllable gas permeability --- breathable film --- polymer composite --- processing --- polyamide 6 --- compression molding --- polymorphism --- polyamide 6 --- injection molding --- polymorphism --- humidity --- mechanical properties

Product/Process Fingerprint in Micro Manufacturing

Author:
ISBN: 9783039210343 / 9783039210350 Year: Pages: 274 DOI: 10.3390/books978-3-03921-035-0 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General)
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

The continuous miniaturization of products and the growing complexity of their embedded multifunctionalities necessitates continuous research and development efforts regarding micro components and related micro manufacturing technologies. Highly miniaturized systems, manufactured using a wide variety of materials, have found application in key technological fields, such as healthcare devices, micro implants, mobility, communications, optics, and micro electromechanical systems. Innovations required for the high-precision manufacturing of micro components can specifically be achieved through optimizations using post-process (i.e., offline) and in-process (i.e., online) metrology of both process input and output parameters, as well as geometrical features of the produced micro parts. However, it is of critical importance to reduce the metrology and optimization efforts, since process and product quality control can represent a significant portion of the total production time in micro manufacturing. To solve this fundamental challenge, research efforts have been undertaken in order to define, investigate, implement, and validate the so-called “product/process manufacturing fingerprint” concept. The “product manufacturing fingerprint” concept refers to those unique dimensional outcomes (e.g., surface topography, form error, critical dimensions, etc.) on the produced component that, if kept under control and within specifications, ensure that the entire micro component complies to its specifications. The “process manufacturing fingerprint” is a specific process parameter or feature to be monitored and controlled, in order to maintain the manufacture of products within the specified tolerances. By integrating both product and process manufacturing fingerprint concepts, the metrology and optimization efforts are highly reduced. Therefore, the quality of the micro products increases, with an obvious improvement in production yield. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on novel methodological developments and applications in micro- and sub-micro-scale manufacturing, process monitoring and control, as well as micro and sub-micro product quality assurance. Focus will be on micro manufacturing process chains and their micro product/process fingerprint, towards full process optimization and zero-defect micro manufacturing.

Keywords

micro-injection moulding --- quality assurance --- process monitoring --- micro metrology --- positioning platform --- Halbach linear motor --- commercial control hardware --- diffractive optics --- gratings --- microfabrication --- computer holography --- manufacturing signature --- process fingerprint --- Fresnel lenses --- injection compression molding --- injection molding --- micro structures replication --- confocal microscopy --- optical quality control --- uncertainty budget --- optimization --- precision injection molding --- quality control --- process monitoring --- product fingerprint --- process fingerprint --- electrical discharge machining --- electrical discharge machining (EDM) --- surface roughness --- surface integrity --- optimization --- desirability function --- satellite drop --- electrohydrodynamic jet printing --- charge relaxation time --- laser ablation --- superhydrophobic surface --- process fingerprint --- product fingerprint --- surface morphology --- artificial compound eye --- multi-spectral imaging --- lithography --- spectral splitting --- plasma-electrolytic polishing --- PeP --- surface modification --- finishing --- electro chemical machining --- ECM --- Electro sinter forging --- resistance sintering --- electrical current --- fingerprints --- electrical discharge machining --- micro drilling --- process monitoring --- quality control --- electrochemical machining (ECM) --- process control --- current monitoring --- current density --- surface roughness --- inline metrology --- haptic actuator --- impact analysis --- high strain rate effect --- damping --- 2-step analysis --- micro-grinding --- bioceramics --- materials characterisation --- dental implant --- microinjection moulding --- process fingerprints --- flow length --- quality assurance --- n/a

Polymeric Foams

Authors: ---
ISBN: 9783039216321 / 9783039216338 Year: Pages: 322 DOI: 10.3390/books978-3-03921-633-8 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- Chemical Engineering
Added to DOAB on : 2019-12-09 11:49:16
License:

Loading...
Export citation

Choose an application

Abstract

Advances in nanotechnology have boosted the development of more efficient materials, with emerging sectors (electronics, energy, aerospace, etc.) demanding novel materials to fulfill the complex technical requirements of their products. This is the case of polymeric foams, which may display good structural properties alongside functional characteristics through a complex composition and (micro)structure in which a gas phase is combined with rigid ones, mainly based on nanoparticles, dispersed throughout the polymer matrix. In recent years, there has been an important impulse in the development of nanocomposite foams, extending the concept of nanocomposites to the field of cellular materials. This, alongside developments in new advanced foaming technologies which have allowed the generation of foams with micro, sub-micro, and even nanocellular structures, has extended the applications of more traditional foams in terms of weight reduction, damping, and thermal and/or acoustic insulation to novel possibilities, such as electromagnetic interference (EMI) shielding. This Special Issue, which consists of a total of 22 articles, including one review article written by research groups of experts in the field, considers recent research on novel polymer-based foams in all their aspects: design, composition, processing and fabrication, microstructure, characterization and analysis, applications and service behavior, recycling and reuse, etc.

Keywords

grey relational analysis --- multi-objective particle swarm optimization --- acoustic performances --- Ethylene Propylene Diene Monomer --- polyurethane foam composites --- DOPO --- itaconic acid --- ethyl cellulose --- phenolic foams --- composites --- adjacent façade --- PUR --- energy conservation --- heat transfer --- burning characteristic --- semi-rigid polyurethane foams --- aluminum microfibers --- quasi-static compression tests --- mechanical properties --- energy absorption capability --- foams --- polyamide --- crystalline --- thermal conductivity --- mechanical property --- functional --- biomaterials --- composites --- EMI --- cellulose foam --- polypropylene --- foaming quality --- impact property --- intrinsic toughness --- flame-retardant ABS microcellular foams --- phosphorus flame retardants --- MuCell® injection-molding foaming --- graphene oxide --- rigid polyurethane foam --- thermogravimetric analysis --- activation energies --- extrusion foaming --- super critical CO2 --- lignin --- sound absorption coefficient --- mechanical property --- Pluronic --- surfactants --- foams --- SANS --- multilayers --- epoxy composite foam adhesive --- core–shell rubber --- impact wedge–peel test --- automobile structural adhesives --- flame retardancy --- foams --- phosphorus --- ternary synergistic effect --- polypropylene --- fluoelastomer --- scCO2 foaming --- heterogeneous nucleation --- polypropylene --- cellulose nanofiber --- foam injection molding --- mechanical properties --- polystyrene foams --- 1,3,5-benzene-trisamides --- cell nucleation --- foam extrusion --- foam morphology --- supramolecular additives --- thermal insulation --- compression properties --- piezoelectric --- functional foam --- piezocomposite --- PZT --- expandable microspheres --- permittivity --- polyetherimide foams --- graphene --- multifunctional foams --- ultrasonication --- scCO2 --- electrical conductivity --- polymer waste --- polyurethane foam --- leaching test --- microstructure --- absorbent PMI foam --- metallic tube --- electromagnetic wave absorption --- mechanical properties --- failure mechanism --- polymers --- foams --- shock compression --- equation of state --- epoxy --- foams --- expandable microspheres --- graphene --- nanotubes --- conductivity --- syntactic foams --- n/a

Micro/Nano Manufacturing

Authors: ---
ISBN: 9783039211692 / 9783039211708 Year: Pages: 208 DOI: 10.3390/books978-3-03921-170-8 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General)
Added to DOAB on : 2019-12-09 11:49:15
License:

Loading...
Export citation

Choose an application

Abstract

Micro manufacturing involves dealing with the fabrication of structures in the size range of 0.1 to 1000 µm. The scope of nano manufacturing extends the size range of manufactured features to even smaller length scales—below 100 nm. A strict borderline between micro and nano manufacturing can hardly be drawn, such that both domains are treated as complementary and mutually beneficial within a closely interconnected scientific community. Both micro and nano manufacturing can be considered as important enablers for high-end products. This Special Issue of Applied Sciences is dedicated to recent advances in research and development within the field of micro and nano manufacturing. The included papers report recent findings and advances in manufacturing technologies for producing products with micro and nano scale features and structures as well as applications underpinned by the advances in these technologies.

Keywords

fluid jet polishing --- deterministic polishing --- variable pitch path --- residual error optimization --- path adaptability --- chatter identification --- three-dimensional elliptical vibration cutting --- empirical mode decomposition --- intrinsic mode function --- feature extraction --- micro-EDM molds --- micro-lens array --- contactless embossing --- friction coefficient --- micro 3D printing --- micro stereolithography --- process parameter optimization --- Taguchi’s method --- multi-objective particle swarm optimization --- flow control --- culture dish adapter --- small recess structure --- closed environment --- perfusion culture --- optical encoder --- grating --- blaze --- injection molding --- micro assembly --- active alignment --- opto-ASIC --- wafer-level optics --- antireflection nanostructure --- microlens array mold --- ultraprecision machining --- anodic aluminum oxide --- spatial uncertainty modeling --- additive manufacturing --- uncertainty quantification --- Image segmentation --- gaussian process modeling --- additive manufacturing --- selective laser melting --- surface roughness --- design of experiments --- Ti6Al4V --- SERS --- Surface-enhanced Raman scattering --- nanosphere array --- nanocone array --- hot embossing --- nanoimprinting --- plasma nitriding --- micro-nozzle --- micro-spring --- nitrogen supersaturation --- hardening --- hydrophobicity --- stiffness control --- product development --- conceptual design --- micro assembly --- data structure --- design for manufacturability --- low PC clinker --- Portland limestone ternary fiber–cement nanohybrids --- flexural strength --- TGA/dTG --- XRD --- MIP --- water impermeability tests --- micro and nano manufacturing --- micro-fluidics --- micro-optics --- micro and nano additive manufacturing --- micro-assembly --- surface engineering and interface nanotechnology --- micro factories --- micro reactors --- micro sensors --- micro actuators

Listing 1 - 8 of 8
Sort by
Narrow your search