Search results: Found 5

Listing 1 - 5 of 5
Sort by
Zur Modellbildung und Simulation reibungserregter Schwingungen in Pkw-Schaltgetrieben

Author:
Book Series: Schriftenreihe des Instituts für Technische Mechanik, Karlsruher Institut für Technologie ISSN: 16143914 ISBN: 9783731506683 Year: Volume: 30 Pages: IX, 189 p. DOI: 10.5445/KSP/1000069374 Language: GERMAN
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:02:00
License:

Loading...
Export citation

Choose an application

Abstract

An approach for the reproduction of friction induced vibrations in shift gearboxes in audible frequency range is presented. The research's core is given by follower forces, which arise out of the sliding clutch and gear contact. Firstly, a multi-body dynamic system with few degrees of freedom is presented, which is extended step-by-step. Besides the pure analysis of the stationary solution's stability, dynamic solutions are presented and discussed.

High-Pressure Studies of Crystalline Materials

ISBN: 9783038971313 9783038971320 Year: Pages: 330 DOI: 10.3390/books978-3-03897-132-0 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Chemistry (General) --- Mathematics --- Environmental Sciences
Added to DOAB on : 2018-09-20 10:13:12
License:

Loading...
Export citation

Choose an application

Abstract

[This book is a printed edition of the Special Issue of Crystals: High-Pressure Studies of Crystalline Materials. It also includes additional articles published in Crystals and related to the topic of the Special Issue, which have been selected based upon their relevance and scientific quality.]

Acoustic and Elastic Waves: Recent Trends in Science and Engineering

Authors: ---
ISBN: 9783038422976 9783038422969 Year: Pages: XVI, 448 DOI: 10.3390/books978-3-03842-297-6 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Mathematics --- Physics (General) --- Acoustics
Added to DOAB on : 2017-02-20 08:51:20
License:

Loading...
Export citation

Choose an application

Abstract

The present Special Issue intends to explore new directions in the field of acoustics and ultrasonics. The interest includes, but is not limited to, the use of acoustic technology for condition monitoring of materials and structures.Topics of interest (among others):• Acoustic emission in materials and structures (without material limitation)• Innovative cases of ultrasonic inspection• Wave dispersion and waveguides• Monitoring of innovative materials• Seismic waves• Vibrations, damping and noise control• Combination of mechanical wave techniques with other types for structural health monitoring purposes.Experimental and numerical studies are welcome.

Microscale Surface Tension and Its Applications

Authors: ---
ISBN: 9783039215645 / 9783039215652 Year: Pages: 240 DOI: 10.3390/books978-3-03921-565-2 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 16:10:12
License:

Loading...
Export citation

Choose an application

Abstract

Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to:Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems. We expect novel as well as review contributions on all aspects of surface tension-based micro/nanoengineering. In line with Micromachines' policy, we also invite research proposals that introduce ideas for new applications, devices, or technologies.

Keywords

mist capillary self-alignment --- laser die transfer --- hydrophilic/superhydrophobic patterned surfaces --- microasssembly --- droplet transport --- microfluidics --- vibrations --- contact line oscillation --- asymmetric surfaces --- anisotropic ratchet conveyor --- surface tension --- capillary --- bearing --- wetting --- computational fluid dynamics --- droplet manipulation --- lab-on-a-chip --- microfluidics --- non-invasive control --- photochemical reaction --- photoresponsible surfactant --- surface tension --- two-phase flow --- wettability --- electrowetting --- actuation --- capillary pressure --- lab-on-a-chip --- Nasturtium leaf --- smart superhydrophobic surface --- hot drop --- condensation --- microtexture melting --- self-lubricating slippery surface --- wettability gradient --- electrosurgical scalpels --- anti-sticking --- soft tissue --- continuous-flow reactor --- mixing --- solutal Marangoni effect --- relaxation oscillations --- super-hydrophobic --- durable --- adhesion --- corrosive resistance --- droplet --- vibrations --- transport --- microfluidics --- self-cleaning surface --- superhydrophobic --- superhydrophilic --- superomniphobic --- microfluidics --- electrodynamic screen --- gecko setae --- micropipette-technique --- air-water surface --- oil-water interface --- soluble surfactant --- insoluble lipids --- “black lipid films” --- “droplet-interface-bilayers” --- equilibrium --- dynamic --- adsorption --- gas-microbubbles --- oil-microdroplets --- lung-surfactants --- nanoprecipitation --- microfluidics --- capillary gripper --- pick and place --- micromanufacturing --- two-photon polymerization --- stereolithography --- polydimethylsiloxane (PDMS) replication --- rigid gas permeable contact lenses --- wettability --- hydrophilic --- hydrophobic --- 355 nm UV laser --- surface treatment --- microstructure --- contact angle --- droplets --- liquid bridge --- microfabrication --- micromanipulation --- pick-and-place --- soft robotics --- surface tension --- wetting

Machining—Recent Advances, Applications and Challenges

Authors: ---
ISBN: 9783039213771 / 9783039213788 Year: Pages: 554 DOI: 10.3390/books978-3-03921-378-8 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 16:10:12
License:

Loading...
Export citation

Choose an application

Abstract

The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Keywords

dry-cutting --- concrete --- segmented diamond blade --- topography --- diameter variation --- weight loss --- in situ estimation --- SACE-drilled hole depth --- spark-assisted chemical engraving --- glass machining --- computer vision --- electrochemical discharge machining --- butt weld joint --- fatigue --- crack growth rate --- weld reinforcement --- cooling rate --- artificial neutral network --- cutting parameters --- magnesium alloys --- optimization --- prime machining costs --- surface roughness --- electropulsing --- machinability --- chip compression ratio --- current density --- specific cutting energy --- cutting edge microgeometry --- residual stress --- finite element model --- cutting edge preparation --- Inconel 718 --- stiffness properties --- parameter identification --- connections --- machine tool --- response surface methodology --- design of experiments --- modal testing --- plastic zone --- fracture mechanism --- steel sheet --- cutting process --- Huber–Mises stress --- finite element method --- microscopic analysis --- PVD Ti0.41Al0.59N/Ti0.55Al0.45N coating --- cutting temperature --- Inconel 718 --- cutting tool wear --- secondary adhesion wear --- turning --- machining --- aluminium --- flank super abrasive machining (SAM) --- flank milling --- Inconel® 718 --- roughness --- residual stress --- machine vision --- on-machine monitoring --- tool insert condition --- computer numerical control --- turning machine tools --- multi-beam laser --- heat transfer analysis --- fast simulation --- GPU --- analytic solution --- minimum quantity lubrication --- surface grinding --- multi-objective optimization --- grey relational analysis --- surface topography --- sustainable machining --- Gamma-TiAl --- superalloys --- slight materials --- drilling --- titanium aluminides --- additive manufacturing --- single point incremental sheet forming --- residual stresses --- X-ray diffraction --- ultra-precision machining --- slow tool servo --- surface topography --- simulation --- microlens array --- sinusoidal grid --- Milling stability --- variable pitch --- chatter --- self-excitation --- milling --- ceramics --- ductile machining --- PCD --- corner radius --- material removal rate --- adhesive --- machining --- modelling --- dry --- CFRP/UNS A92024 --- induction assisted milling --- tool wear --- taguchi method --- cutting tool --- machining temperatures at two deformation zones --- force–temperature correlation through analytical modeling --- high computational efficiency --- real-time prediction --- hybrid stacks drilling --- minimum quantity lubrication --- hole quality --- tool wear --- WEDM --- EN 31 steel --- surface roughness --- fractal dimension --- ANN --- GA --- cryogenic machining --- cutting tool --- cutting geometry --- titanium --- power consumption --- material-removal rate --- specific energy consumption --- grain density --- modeling --- shape memory alloy --- superelastic nitinol --- WEDM --- heat transfer search algorithm --- DSC test --- shape memory effect --- dish angle --- trochoidal step --- response surface methodology --- surface roughness --- desirability approach --- tool wear --- trochoidal milling --- titanium alloy --- chip morphology --- thin-wall machining --- chatter --- vibration --- deflection --- damping --- prediction --- workholding --- fixture --- dynamic --- stability --- titanium alloys --- machining --- turning --- machinability --- tool wear --- laser-assisted machining --- Taguchi method --- optimal machining conditions --- machining characteristic --- milling --- the cutting force components --- vibrations --- magnesium alloys --- artificial neural networks

Listing 1 - 5 of 5
Sort by
Narrow your search